Relay Controller

DDRC810DT-GL | 8 x 10A Relays Controller with Double Throw Relays General Loading

Skip to product information
Relay Controller
  • Relay Controller
  • Relay Controller
  • Relay Controller
  • Relay Controller
  • Relay Controller
  • Relay Controller
DDRC810DT-GL | 8 x 10A Relays Controller with Double Throw Relays General Loading

DDRC810DT-GL | 8 x 10A Relays Controller with Double Throw Relays General Loading

The Dynalite DDRC810DT-GL is an eight-channel relay controller designed to switch general electrical loads and control bidirectional motors. Each channel uses a voltage-free SPDT changeover relay, allowing normally open and normally closed switching from the same output.

The controller is suited to applications such as curtains, blinds, lighting circuits and other switched equipment. Each channel can switch general-use loads up to 10 A, subject to the specified load type and the controller’s maximum device load.

DDRC810DT-GL connects to the DyNet RS-485 network and can respond to commands from Dynalite switches, sensors, schedules, presets and integrated control systems. It also includes eight dry-contact inputs plus an auxiliary input for connection to voltage-free switches or external control contacts.

The 12-unit DIN-rail enclosure is intended for installation within a distribution board or lighting-control panel. Manual override switches, channel indicators and runtime tracking provide practical commissioning, testing and diagnostic functions at the controller.
Features

• Eight voltage-free SPDT changeover relay outputs
• General-use switching rated up to 10 A per channel
• Suitable for bidirectional curtain and blind motors
• Eight dry-contact inputs plus one auxiliary input
• DyNet RS-485 and DMX512 communication support
• Manual override control for every output channel
• Runtime tracking for individual relay channels
• 12-unit DIN-rail enclosure for switchboard installation
• Can operate standalone or on a DyNet network
Specifications

  • Model: DDRC810DT-GL
  • Product Type: Eight-channel SPDT relay controller
  • Supply Type: Single-phase
  • Supply Voltage: 100–240 V AC
  • Supply Current: 0.25 A
  • Supply Frequency: 50/60 Hz
  • Relay Outputs: 8 x voltage-free SPDT changeover outputs
  • General-Use Rating, Normally Open: 10 A at 240 V AC or 5 A at 24 V DC
  • General-Use Rating, Normally Closed: 5 A at 240 V AC or 5 A at 24 V DC
  • Incandescent and Electronic Ballast Rating: 5 A at 240 V AC on normally open contacts
  • Motor Rating: 9.8 FLA at 120 V AC or 8 FLA at 240 V AC on normally open contacts
  • TV Rating: TV-5 at 120 V AC on normally open contacts
  • Maximum Inrush Current: 100 A on normally open contacts
  • Maximum Device Load: 40 A
  • Maximum Channel-to-Channel Voltage: 400 V AC
  • Dry-Contact Inputs: 8 inputs plus 1 auxiliary input
  • Maximum Dry-Contact Cable Length: 20 m
  • Serial Port: 1 x RS-485
  • Supported Protocols: DyNet and DMX512
  • DMX Receive Channels: 8
  • DyNet DC Output: 12 V DC, 120 mA
  • Supported User Interfaces: Approximately 6 from the DyNet DC output
  • User Controls: 1 x service switch and manual override switch for each channel
  • Indicators: 1 x service LED and channel status indication
  • Output Terminals: COM, NO and NC screw terminals
  • Dimensions: 93 x 215 x 64 mm
  • Construction: Polycarbonate 12-unit DIN-rail enclosure
  • Packed Weight: 0.54 kg
  • Operating Temperature: 0°C to 50°C ambient
  • Storage and Transport Temperature: −25°C to 70°C ambient
  • Relative Humidity: 0–90% non-condensing
  • Installation: Indoor installation only
  • Compliance: CE, RCM, UL/cUL, FCC, UKCA and RoHS
  • Ordering Code / 12NC: 913703035209
Downloads

You may also like